SUCCESSFUL BLOOD ELECTRIFIER REPLICATION BY MIKE FINLEY

The finished blood electrifier that could defeat all viral infections and bioweapons.
The finished blood electrifier that could defeat all viral infections and bioweapons.

AuraAfterAskingfor-DiamondWhiteEmeraldGreenCobaltBlue
Michael Finley of www.FluorideFreeIllinois.org
Back in March 2014, Mike Finley of Illinois informed me about his successful replication of the blood electrifier using the instructions from our eBook.
Prior to his final testing, we had a very healthy conversation which should help anyone contemplating to do the same.
The video will be uploaded soon. In the meantime, here are the pictures…

Our conversation…

The following exchanges of email should give you the inspiration to replicate the blood electrifier which could help you eradicate any immune disorders like we, here at eClinik, used to have.
Due to this gadget, and others in the protocol, we have not visited the drugstore for the last 7 years yet. I personally, had to visit the hospital twice a year for my vasculitis, but no more.
Anyway, Mike has approved the posting of all materials related to his successful replication of the blood electrifier, the same device we were using since 2008.
I just noticed that our conversation have spanned for an entire year 😉
Enjoy!
——– Original Message ——–
Subject: Re: Question about colloidal silver device
From: eClinik
Date: Wed, February 20, 2013 12:14 am
To: Mike Finley
On 2/20/2013 11:35 AM, Mike Finley wrote:
I am so grateful for this book. I have read of the things you have in here but never have seen it put together so well and in such a clear, concise manner. I have ordered all the parts for most of the devices and only have 1 question if you don’t mind.
For the colloidal silver device, does it matter what size the glass of water is? For the 15 min, should it be a 12oz glass or 8oz?
Thanks,
Mike

Hi Mike:
We are using 8 oz glass for this one.
The actual timing could vary depending on the actual voltage and temperature. So, the best way to verify if silver ions are already present in water is to project a laser beam which should render a coherent light across the colloid. [Laser beam scatters when water is still free from silver ions.] You might need to go up to 20 or 25 minutes during low ambient temperatures, and longer if battery is already weak. For as long as the 20ml daily dosage for adult [10ml kids] is maintained, you should be alright. In our case case, we sometimes go overboard but that’s just us.
As a policy, we don’t recommend taking more than the recommended 20ml daily dosage, especially when just starting up on the whole protocol, because the parasite population is still great and you will be neutralizing a lot of them simultaneously, which could overload our biofilter system, i.e. liver and kidneys.
Always drink plenty of clean ozonized water. Headaches, fever and skin rashes are early signs that you are not detoxifying efficiently.
If there’s any other clarifications you might need, please feel free to contact us again.
We’re glad to be of help.
Fraternally,
ed
——– Original Message ——–
Subject: Re: Question about colloidal silver device
From: eClinik
Date: Wed, February 20, 2013 7:59 am
To: Mike Finley
On 2/20/2013 9:57 PM, Mike Finley wrote:
Ed,
Thanks again for this groundbreaking book and your feedback. God bless and peace to you!
Mike

My pleasure, Mike.
Mabuhay!
ed


On 2/19/2014 2:11 PM, Mike Finley wrote:
Ed,
I hope you are well. I was wondering what the differences were between version 1.2 and 2.0 of the download? I have 1.2 and am just wondering in general what the new version has included.
Thanks,
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Wed, February 19, 2014 12:21 am
To: Mike Finley
Hi, Mike:
Thank you for contacting us today.
Re your question:
The second version is more user-friendly. We’ve added more illustrated guide in the area of electronics, among others.
It also has a new chapter which gives deeper understanding of the human body and life in general.
Some topics are also expanded based on clarificatory questions being sent in.
We will continue to improve this work.
Regards to the family.
Fraternally,
ed


On 2/20/2014 1:05 PM, Mike Finley wrote:
Ed,
Thanks for the quick response. I am very grateful for all of your efforts with this document!
I was able to successfully create the frequency generator based on your 1.2 plans. I am wondering what I should be seeing if I have a DMM connected to the 2 electrodes that will be attached to the wrist. I believe I am seeing approx. 10v to -10v cycling back and forth. Also, what does the 500k potentiometer do this output?
Thanks again and Peace,
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Thu, February 20, 2014 12:50 am
To: Mike Finley
Mike:
Due to the speed of the pulses, you won’t be seeing the accurate voltage readings.
Minus the circuit voltage drop, you should be getting 50v peak-to-peak, instead of 27x 2 = 54v. This is more than enough for the treatment, that is why there’s a 100k variable resistor for the user to limit the actual current to his comfort level. There’s always a need to adjust this resistor, i.e. by lowering the resistance, as the battery weakens over time.
Thanks again for contacting us.
Mabuhay,
ed
On 2/21/2014 12:23 AM, Mike Finley wrote:
Thanks again!
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Thu, February 20, 2014 10:50 am
To: Mike Finley
My pleasure…
——– Original Message ——–
Subject: RE: Question about Towards Healthcare Emancipation
From: “Mike Finley”
Date: Mon, March 17, 2014 2:58 pm
To: “eClinik”
Ed,
I recently finished my blood electrifier that was built using your EP V1.2 document plans.
I created a video and took some pictures during the process of building it and wanted to share them on my blog along with a pointer to your v2.0 document. I was wondering if you could review the video and tell me what you think. I made a couple of cosmetic changes (dc switch and banana plugs) and am still wanting to make sure the entire circuit is working correctly. Here is a link to the video if you care to take a look:
http://1drv.ms/1hsDmXT
Also, wondering if you have any success stories that I could share.
Peace,
Mike
On 3/20/2014 6:18 AM, Mike Finley wrote:
Ed…just wanted to make sure you saw this.
Thanks again,
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Thu, March 20, 2014 1:01 am
To: Mike Finley
Congratulations, Mike!
I should say that your rig is well built, and is functioning very well, with reference to the LED which is blinking very nicely.
Anyway, I have a few notes/suggestions:
Also try testing your output in AC meter setting; your output is already 4.2Hz pulsating AC, i.e. 4.2 pulses per second [reversing polarity every time it fires]; you should see a pulsing readout, without the polarity of course; expected max output is 50 V peak to peak, gradually lowers over time [30 days or so];
When you were turning the intensity knob, I think when you said “a hundred” and turning the same knob counterclockwise, you are referring to full 100k ohms, right? The result of which should be the lowest output, because you are increasing the resistance to a full 100,000 ohms of the potentiometer. Higher resistance gives lower output. This is a correct connection; no need to change anything. My only concern is the interpretation. 😉
Have you tested it on your wrist already?
Also, can i post your work in our blog? I’m sure everybody would like to see what you’ve done.
Would appreciate future updates, too.
Thank you very much in advance.
ed
On 3/21/2014 1:08 AM, Mike Finley wrote:
Ed,
Thanks for the feedback! Yes, it is a 100K potentiometer and I misspoke on the video. I will note that or redo that section of the video. I have not tried it yet…I just wanted to ensure I had done everything correctly before doing so. I will try the AC test and appreciate that feedback.
Please feel free to use anything and share on your blog. And I will keep you posted on any updates.
Eternally grateful,
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Thu, March 20, 2014 8:35 pm
To: Mike Finley
You’re welcome, Mike.
And thanks for the permission to showcase your work on the blog.
Fraternally,
ed
On 3/22/2014 1:38 AM, Mike Finley wrote:
Ed,
Hope you are doing well today…Just a quick follow up on AC testing. I am seeing a range of +16 to +25 on the AC settings. Do think I may have something wrong with the circuit?
Maybe an incorrect resistor or something?
Thanks again,
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Fri, March 21, 2014 8:37 pm
To: Mike Finley
No, you’re doing ok.
Your digital meter is designed to “hold” a readout in a certain amount of time so that you, the user, will be able to read it. Otherwise, if it is displaying the readout in real time, you won’t be able to do so, as the pulses is changing relatively fast.
The final testing would be on your wrist, where you can feel the pulses reversing in polarity. And you can adjust its intensity to your liking.
Congratulations again, Mike!
ed
On 3/23/2014 1:44 PM, Mike Finley wrote:
Ed…Thanks again. That is good to hear. Time to give it a try.
Are you ok with me putting the parts list and where I purchased them from on my blog? I don’t want to overstep any bounds or affect sales of your document. I also took some pictures during the process of building it.
https://onedrive.live.com/?gologin=1&mkt=en-US#cid=19011AC749D606E0&id=19011AC749D606E0%213534
Peace,
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Sun, March 23, 2014 1:39 am
To: Mike Finley
Hi, Mike:
You can help your friends and blog guests in any way you deem fit, Mike.
Please extend my regards to all of them.
ed
On 3/24/2014 10:43 PM, Mike Finley wrote:
Ed,
Thanks again and I finally tried it out yesterday with success. Cheers to the future elimination of insurance and modern day medical practices 😉
Peace,
Mike
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Mon, March 24, 2014 11:20 pm
To: Mike Finley
Just don’t forget to start slowly, Mike, and drink plenty of water. Follow all precautions, too. You are now in full control of your own health.
Mabuhay!
ed
——– Original Message ——–
Subject: Re: Question about Towards Healthcare Emancipation
From: eClinik
Date: Mon, March 25, 2014 10:35 pm
To: Mike Finley
Thanks for the reminder…
Conquer fear and live free

Towards Healthcare Emancipation 2.x by Edgar Capilitan Enero

We can help bring down the Cabal and defeat the Depopulation Agenda

Big Pharma is one of the sources of funds for the Cabal. It also serves as the weapon of mass destruction via vaccine tainted with live virus it is suppose to protect us from, and the deadly chemicals use to treat our diseases that they caused through our GMO / pesticide contaminated food supply.
We can avoid using drugs, defeat any viral attack and scaremongering easily by knowing how to build our own comprehensive antiviral system. Find more about it here.

Health & Medicine - Top Blogs  Philippines

10 thoughts on “SUCCESSFUL BLOOD ELECTRIFIER REPLICATION BY MIKE FINLEY”

  1. Dr. Hulda Clark has been offering this device for years. Youtube “Myzapper”. She has perfected this quit some time ago but has been suppressed. She did not die of cancer as the media has claimed. Put one plus one together and the conclusion is evident. However, a loyal team of Humanitarians have picked up where she left off and this concept has been thriving for years. Knowledge is power. Accuracy is vital and she has perfected it. Im just a patron and sharing what has worked and is a must share for mankind. Peace.

    1. No, this is not the same as Hulda zapper. This is much simpler.
      Clark’s zapper operates with high frequency and can only kill bacteria if the user knows the “right frequency” for the right bacteria.
      This is more user friendly. Find more about it here http://myeclinik.com/
      But, of course, you can always suit yourself…

      1. If I could buy electrifier online? I am afraid of electricity to do something….but if is ready …of course

  2. If coloidial silver is used, a warning might be issued about overdosing.
    Quite a few young people used far too much thinking it would work quicker,resulting in bluey green skin,which so far cant be helped,it has spoiled life for these young people

    1. If these young people skin has turned…it is because they incorrectly make their CS.
      Do not believe that their skin discoloration is permanent…they must flush out their system with plenty of clean pure water and exercise, sauna etc on a daily basis. Their are herbs and oils that will help as well as detox baths.

    2. You can chelate the excess silver from your body. The condition is NOT permanent. The comment is dis-information.

  3. It would be nice to have this BLOOD ELECTRIFIER provided it KILLS viruses or uncontrolled burst of unfriendly protein. How much does it cost?

Leave a Reply